For every car, the brake system is considered as a very important aspect. Basically the brakes are composed of master and wheel cylinders along with the hydraulic lines. When you bear down on the brake knob, then the hydraulic fluid pushed back to each and every wheel so as to stop the car.
If in any case, there is a leakage in the hydraulic lines, then you have to continuously pump the brakes so to keep the brakes operating. For this, there is a number of things that are taken into consideration so as to pump up the car brakes are described by several mechanic companies such as https://www.tyreandwheel.com.au/mechanical/brakes/. The steps to accomplish this task are described below.
Image Source: Google
The first and foremost thing to perform is to push the brake switch of your car which is on the left side of your car. And present at a center in the self-programmed car. By pushing the brakes it will push the oil out of the master brake container. After that, this liquid passed through the hydraulic lines and reach to each wheel.
Another thing to carry out is to press down the pedal repeat again and again. Repeat this process until and unless pedal will no more move towards the downside and endow with the confrontation to the strain that you are applying on it.
The last thing that you have to do is to put the strain on the pedal all the time to slow down the car so as to make certify that the brakes are now working appropriately.