Business and Management

Boat Bilge Pumps – A Type For Every Use

Bilge pumps installed under the floor, where water seeks the lowest part of the boat, which is standard. These are the most important because they protect the boat. There are two basic types: centrifugal and diaphragm. 

Centrifugal pumps use impellers and are usually electrically or mechanically operated. They depend on an electrical source or direct mechanical power from the engine or generator shaft. For more information about the bilge pump, you can see here now.

Bilge pump

Image Source: Google

When installing electric pumps, wiring connections are important. The connection must be watertight and fastened as safely as possible to prevent interference with the pump or float switch.

Some electric marine pumps include an internal float switch, which of course activates the pump when the water rises. These are typically small pumps, and the internal switch design can make them more susceptible to blockage and sticking due to bilge debris. 

Most bilge pumps require a separate float switch, allowing easy testing of the switch and pump (manually lifting the switch arm) and separate installation positions for the switch and pump. For example; Knowledge holds that two pumps can be better than one.

Both pumps can be strategically located in the bilge pump, but the switch for one pump may be greater than the other. This allows automatic operation of only one pump for regular duty, reducing the current draw and life of only one pump.